Archive for February, 2009
Save Money And The Environment And Choose Log Burning Fires
Friday, February 27th, 2009 by PyroThe economic downturn has hit a lot of families really hard and they are needing to cut back on every day expenditure including socialising and trips out and of course every day clothing, but want about the very staples of life for example light and heating.
If the economy isn’t enough to have to worry about we are also constantly bombarded about global warming and the need to be environmentally friendly , so why not save money and do your bit for the environment at the same time.
Lighting is for the most part quite easy with a little discipline. Simply make sure you switch off all unused appliances and lighting if nobody is in the room and don’t leave your electrical appliances on standby as you will be astounded at the cumulative cost of all that wasted electricity.
A little household focus will have you saving money in no time as well as doing your bit for the environment too.
That only leaves the heating bills which can soon add up depending what part of the country you live in. I was recently introduced to cast iron wood stoves as an alternative method of not only heating the house but also for cooking too.
Woodburning stoves are very popular in some parts of the country and yet in others they are relatively unknown or even considered, which is a shame because they really are very effective and even cosy too if you want to huddle round a real wood fire.
The beauty of woodburners is the fact that on the one hand you can save yourself a serious amount of money on your domestic heating bills, but you will also be doing your bit for the environment by using recycled fuel and living neutral carbon footprint.
Once you start investigating them you will quickly find that a cast iron woodburning stove can come in all sorts of shapes and sizes and are useful for a whole range of options for example:
You could choose a stove with a back boiler to heat the radiator or supply hot water or you could get a stove that you could use for cooking. Equally if you are happy with you cooking arrangements you could just get a nice cosy log burner to supplement and reduce the cost of your existing heating.
In the past some people have been put off these very cost effective and environmentally friendly stoves as they only ran on wood but manufactures (bless their cotton socks) have introduced cast iron multifuel stoves as well.
Multi fuel stoves are really the answer for those who want their cake and want to eat it. You can for the most part switch from using real or recycled wood (or even peat depending on your locality) to your normal gas or electric supply so you never need to worry about running out of fuel.
Save your self money and do your bit for the environment and check out the latest range of cast iron stoves at your local supplier as soon as possible.
Finding Solar Energy Plans To Put Up A Collector
Monday, February 23rd, 2009 by PyroVery important to building your own solar collector will be step by step solar energy plans that you are able to follow. Of course, a solar collector may appear to be difficult to construct; but, actually, it is not that much of a challenge if you are able to follow well-designed solar energy plans.
The First Step
Before you do anything else, you need to make sure that you clearly understand the difference between solar collectors and panels. Prior to examining any solar energy plans, it is vital that you understand that solar collectors acquire solar energy in the form of heat, while solar panels are what actually turn that energy into electricity.
Another difference is that solar collectors make use of the greenhouse effect. On the other hand, solar panels convert radiant energy into electricity and today are only really cost effective in remote off-grid areas with a price of about $5/watt.
Materials
There is quite a list of materials that you are going to need for your solar energy plans. These will include two rolls of 50-foot 20” aluminum flashing, four 0.06 thick 4×8 sheets of Kalwall, twenty 1x4x8 pine boards with few or no knots, four 1/2x4x8 CDX plywood, four 1x4x8 sheets of insulation with an R value 5 or better, clear silicon caulking, aluminum foil, some felt paper, one gallon of roofing tar, one gallon of oil base paint, angle irons for mounting, sixteen 1/4×3 lag bolts, sixteen 1/4×1 1/2” machine bolts with nuts and washers, 1 ¼” and 2” drywall screws, one pound of 1 ½” galvanized nails with small heads, and plumbing supplies.
The actual process that will take place will depend on what specific solar energy plans you have. However, the advantages that you will gain will typically remain the same, regardless of the particular plans that you are using.
Advantages
There can be very serious advantages to using solar energy. Should you be fortunate enough to be able to invest $2,000 and a few weeks of labor, you will be able to save in excess of $50,000 in hot water and home heating charges. If your use of the sun’s energy is done with efficiency, your consumption could easily be pared down to half, since average American households consume from 1,000 to 2,000 gallons of number two oil per annum. You might even be able to eliminate other fuels entirely, which is certainly the ultimate goal to strive for.
How to Take Care of Your Furnace Filter Needs?
Thursday, February 19th, 2009 by PyroAn electronic furnace filter is the kind that will trap all of the debris, dust and grime from your furnace. If you maintain a furnace, you must learn about furnace maintenance. The simplest thing that you can do to maintain your furnace is to replace the filter regularly. If you run an electronic furnace filter you can avoid spending as much money, as this will do a nicer job at keeping the debris from your furnace so that it cannot put dirt and debris within the furnace that will begin to spread throughout your rooms. Your furnace will also work more effectively due to this 3M furnace filter.
If you struggle with allergies or keep pets, an electrostatic furnace filter is the easiest way that you can prevent this dander and different allergens from infesting your home. This is why the majority of people today are turning to the electrostatic furnace filter as it works so nicely for the home.
Any air that pumps through your house via your furnace ought stay clean. This is better for you and your family and friends, especially if you are similar to so many other families that desire clean air and may suffer from allergies. As long as you use the electrostatic furnace filter, you will get the best kind of 3M furnace filter on the market. However, you still are required to take care of the furnace.
When you depend on a furnace, you will be required to maintain it on a periodic basis. This insudes having the furnace cleaned once every 24 months. This is most often performed by a professional. Cleaning up the air ducts is also a great idea if you want to keep the air in your home as clean as it can be.
Replacing your furnace filter is vital to keep up with each month, especially during the winter months as you are running the furnace more often. You have to be sure to keep up with your furnace maintenance so that you can keep the furnace in good operating order and make it last even longer. A reliable furnace will last you for about 30 years with proper maintenance. And if you select a good furnace, such as a top of the line model, and work on keeping it clean regularly, you will make it stay operational for a long time. You can use the electrostatic furnace filter in this manner and the furnace will run even longer.
Why turn to a lower functioning furnace filter when you are able to use the electrostatic furnace filter using electrostatic technology that is cutting edge? You can find an electrostatic furnace filter at a variety of online outlets? Although that this is a cutting edge 3M furnace filter, you will still need to change it every so often so that it can keep the furnace in good working order. Maintaining your furnace is not difficult, especially when you put in an electrostatic furnace filter, one of the most efficient furnace filters that you could ask for.
Household Fires- What you need to Know About Keeping Your Loved Ones Safe
Tuesday, February 17th, 2009 by PyroFire is a deadly threat to every household. It can strike without warning. There were over 380,000 residential fires in 2005 in the U.S. annually results in some 16,000 injuries and deaths as reported by the NFPA. Everyone should be familiar with the use of fire extinguishers, carbon monoxide detectors, smoke alarms and escape ladders for fire safety and protection.
An early warning is provided by smoke detectors in the event of a fire. Smoke alarms are best, most efficient way to alert your family of a fire in its beginning stages. The more smoke alarms you have installed in your home, the better your chances are that you will be alerted to a fire in progress.
Fire extinguishers provide a tool to fight small, contained fires. Having fire extinguishers strategically distributed in all areas of your home can increase your chances of keeping a small fire from getting out of control and becoming deadly.
Fire extinguishers are categorized by Underwriters Laboratories ratings. The size and type of fire extinguisher determines the type of fire it should be used on. Types of fires are divided into three categories: A, B, or C.Type “A” fires involve wood, paper or fabric material fires. “B” type fires are primarily flammable liquids and oil based fires. Finally, “C” type fires are energized electrical fires.
The number preceding the A, B, or C rating determines the size fire the extinguisher has been tested to be effective on. For example, a 10-B:C fire extinguisher theoretically will extinguish a 25 foot square fire of either flammable liquid or energized electrical origin. A 5-B:C fire extinguisher is rated to fight a 12.5 ft square flammable liquid or electrical fire.
Being ready by using both smoke alarms and fire extinguishers in your home, having a prepared, rehearsed escape plan and knowing what to do in case of fire, can help save your home and your family.It is simple to prevent fire tragedies!
Most guidelines recommend installing at least one smoke alarm on every level of your home, especially near sleeping areas. Another good idea is to place an emergency escape ladder on every floor above the main level.Installing fire extinguishers in and easily accessible location on each floor is a wise move. If you have a large home, you should consider more than one extinguisher per level
For most homes the minimum recommended number of fire safety devices is one smoke detector and one fire extinguisher on every level. However, check your local building code for detailed smoke alarm and CO alarm requirements.
An Overview Of Putting Together Plans For Your Dream Luxury Vacation Home
Friday, February 13th, 2009 by PyroThere are some distinct differences between vacation home plans and traditional home plans. The plan of a vacation home usually have specific features which may include more of an open floor plan and living area, decking area, indoor sports room for a pool table and other activities, patio area and a screened room offering a fantastic view. Location is important for vacation homes and popular areas include in the mountains, on the waterfront or close to the beach. The style of home will depend upon the location and local planning consent but could vary between traditional, Victorian, Prairie style, contemporary or cottage.
The process of developing your dream vacation home can prove stressful and you will need a strong determination to drive the project forward to a successful conclusion and overcome any barriers which hinder progress along the way. It is a good idea to consult a professional who will be able to offer expert advice on every aspect of the house, whether this be from an engineering, design or project management point of view. Compromise may be necessary during parts of the development process so it pays to be practical and reasonable in your demands, but make sure the key aspects you specify within the house are delivered wherever possible as this is your investment and will help to determine the quality of the time you have while enjoying your new home or rental income it may generate if you decide to let it out in the future.
Although many rental homes have great amenities and are beautifully furnished the big advantage of developing your own vacation home is that you have control over not just the exterior look and style of the property, but can also determine the interior feel. This comes down to details as choosing the perfect fire surround or having that sensational glass dining table you have always dreamed of.
Real Flame, Less Mess With a Gel Fireplace
Wednesday, February 11th, 2009 by PyroLots of people think about installing a fireplace in their house. But when they realize the major work it would involve, many of them get discouraged. They realize that they’ll need to tear down walls and cut a hole in the roof for the chimney. There is also a lot of maintenance required for a wood burning fireplace.
But now there’s a simpler approach to installing a fireplace in your home. It’s known as a gel fireplace, and for many people it’s the ideal answer.
More and more people are opting for this contemporary type of fireplace, and there are some good reasons why. Cleaning up after the fire is minimal because it doesn’t produce smoke, soot, or fumes. No more hauling logs in from the cold or cleaning up messy ashes. No need for an extensive selection of fireplace tools and accessories. Just light a can of fuel and enjoy the warmth of your ventless gel fireplace.
A ventless gel fireplace operates quite differently from a traditional fireplace. They create a real fire by burning a gel that’s produced from grain alcohol. This product burns cleanly and produces a real flame with none of the usual mess. Typically, a gel fireplace holds three cans of fuel. Each container burns for about three hours or so. The gel even makes the crackling noise of a wood burning fire and there are scent sticks available you can add to your canisters.
There is no construction involved in installing a gel fireplace and no hookups required. It should only take an hour or so to put it together and set it up anywhere in your house that you choose. It can also be moved around if you’re redecorating your home. Some models can be hung on a wall. Another alternative is to buy a special insert for your existing fireplace in which you can burn the gel canisters.
There are no fumes or smoke produced by a ventless gel fireplace. They do, however, emit a bit of carbon monoxide, but only at a level that is completely safe. They have to undergo strict testing to make sure they comply with regulations regarding emissions of this substance.
Gel fireplaces are easy to maintain. They are also the most energy efficient, cost effective heating units on the market. Since there’s no flue, all the heat enters the room instead of escaping outside. Keep in mind, however, that they are not intended to be a major source of heat for your house, even though they do give off a warm glow.
Gel fireplaces range in price from several hundred to two thousand dollars, depending on the size and style. If you have a busy lifestyle but still want the elegance and warmth of a fire, these fireplaces are well worth the money.
